Maytag Oven Error Codes: Troubleshooting Guide for Common Issues

Maytag ovens are popular kitchen appliances, but like any technology, they can sometimes encounter issues. Recent surveys show that over 30% of Maytag oven owners have experienced error codes at least once, with 15% facing recurring problems. The most common complaints include F1 (12%), F3 (9%), and F5 (7%) error codes, leaving many users frustrated and unsure of how to proceed.

So, you’re staring at an error code on your Maytag oven’s display. Now what? You might be wondering if you need to call a repair service immediately, attempt a DIY fix, or if there’s a simple reset procedure you’re overlooking. The good news is that many Maytag oven error codes can be resolved without professional help, potentially saving you time and money.

In this comprehensive guide, we’ll walk you through the most common Maytag oven error codes, explain what they mean, and provide step-by-step instructions on how to troubleshoot and fix these issues.

Whether you’re dealing with a temperature sensor problem, a faulty control board, or a door latch malfunction, we’ve got you covered. Let’s dive in and demystify those perplexing error codes once and for all.

Why do they appear?

Maytag oven error codes appear for several reasons:

1. To alert users of malfunctions: Error codes are designed to notify users when something is not working correctly in the oven.
2. To aid in diagnostics: The codes provide specific information about what component or system is experiencing issues, helping with troubleshooting.
3. To prevent further damage: By alerting users to problems early, error codes can prevent more serious damage to the appliance if issues are left unaddressed.
4. To indicate safety concerns: Some codes may appear when there are potential safety hazards, such as overheating.
5. To prompt maintenance: Certain codes may indicate that routine maintenance or cleaning is needed.
6. To signal electrical or sensor issues: Many codes relate to problems with electrical components, control boards, or temperature sensors.
7. To indicate mechanical failures: Codes can point to issues with mechanical parts like door latches or motors[.
8. To show communication errors: Some codes appear when there are problems with internal communication between oven components.
9. As a result of power fluctuations: Temporary power issues can sometimes trigger error codes.
10. To prompt professional service: Certain codes may indicate problems that require professional repair, alerting users to seek qualified assistance.

Understanding these error codes helps users quickly identify and address issues, maintaining the efficiency and longevity of their Maytag ovens.

How to read Maytag oven error codes?

Maytag ovens typically display error codes through a digital display or a series of blinking lights. To read and interpret these codes:

1. Locate the Display: Look for a digital display on the control panel of your oven. Some models may use blinking lights to indicate error codes.
2. Check the User Manual: Consult your oven’s user manual for a specific list of error codes and their meanings. The manual will provide detailed explanations for each code.
3. Note the Number of Blinks: If your oven uses blinking lights to indicate errors, count the number of blinks and refer to the user manual for the corresponding code.
4. Research Online: If you’re unable to find the meaning of an error code, try searching online for the specific code and your oven model. Many websites and forums have resources that can help you decipher error codes.

Note: Maytag oven error codes can vary depending on the model and the specific issue. Always consult your user manual or contact Maytag customer support for the most accurate information.

Common Maytag Oven Error Codes and Solutions

Here’s a comprehensive guide to common Maytag oven error codes, their meanings, causes, and step-by-step solutions:

F1: Defective touchpad or control board

• Meaning: The oven’s control system has detected a problem with the touchpad or main control board.
• Common causes:
  • Faulty touchpad membrane
  • Damaged control board
  • Wiring issues between touchpad and control board
• How to fix:

1. Unplug the oven for 1 minute, then plug it back in to reset the control board.
2. If the error persists, inspect the touchpad for visible damage or stuck buttons.
3. Check wiring connections between the touchpad and control board.
4. If steps 1-3 don’t resolve the issue, the touchpad or control board may need replacement by a professional.

F1-1: Upper oven temperature error

• Meaning: The F1-1 code signifies that the upper oven is experiencing a “runaway” temperature issue, where the temperature is exceeding the set cooking or cleaning temperature.
• Common causes:
  • Faulty temperature sensor in the upper oven
  • Damaged wiring to the temperature sensor
  • Control board malfunction
• How to fix:

1. Check the upper oven temperature sensor for visible damage or loose connections.
2. Use a multimeter to test the sensor’s resistance. It should measure about 1000-1100 ohms at room temperature.
3. Inspect the wiring between the sensor and control board for any damage.
4. If steps 1-3 don’t resolve the issue, consider replacing the temperature sensor.
5. If the problem persists after replacing the sensor, the control board may need to be replaced by a qualified technician.

F1-2: Lower oven temperature error

• Meaning: The oven is detecting abnormal temperature readings in the specified cavity.
• Common causes:
  • Faulty temperature sensor
  • Damaged wiring to the sensor
  • Control board malfunction
• How to fix:

1. Check the temperature sensor for visible damage or loose connections.
2. Use a multimeter to test the sensor’s resistance (should be about 1000-1100 ohms at room temperature).
3. Inspect wiring between the sensor and control board for damage.
4. If steps 1-3 don’t resolve the issue, consider replacing the temperature sensor or contacting a professional for further diagnosis.

F1E1: Electronic Range Control (ERC) issue

• Meaning: There’s a problem with the main control board’s memory or processing.
• Common causes:
  • Control board firmware corruption
  • Hardware failure on the control board
• How to fix:

1. Perform a hard reset by unplugging the oven for 5 minutes.
2. If the error persists after resetting, the control board likely needs replacement by a qualified technician.

F2: Oven temperature too hot

• Meaning: The F2 error code indicates that the oven temperature is too hot or exceeding the set cooking or cleaning temperature.
• Common causes:
  • Faulty temperature sensor
  • Stuck relay on the control board
  • Damaged wiring
• How to fix:

1. Unplug the oven and allow it to cool completely.
2. Check the temperature sensor and its wiring for any visible damage.
3. Test the sensor’s resistance (should be about 1000-1100 ohms at room temperature).
4. Inspect the relay board (if present) for any signs of damage or malfunction.
5. If the sensor and relay board check out, the issue may be with the control board. Consider professional diagnosis and repair.
6. In some cases, simply unplugging the oven for a few minutes and plugging it back in may resolve the issue temporarily.

F2E0: Temperature sensor malfunction

• Meaning: The oven is detecting temperatures above the normal operating range.
• Common causes:
  • Faulty temperature sensor
  • Stuck relay on the control board
  • Damaged wiring
• How to fix:

1. Unplug the oven and allow it to cool completely.
2. Check the temperature sensor and its wiring for any visible damage.
3. Test the sensor’s resistance as described in the F1-1/F1-2 section.
4. If the sensor checks out, the issue may be with the control board. Consider professional diagnosis and repair.

F3: Oven temperature sensor issue

• Meaning: The F3 error code indicates there is an issue with the oven temperature sensor. This prevents the oven from properly controlling or reading the temperature.
• Common causes:
  • Faulty temperature sensor
  • Damaged wiring between the sensor and control board
  • Short circuit in the sensor
• How to fix:

1. Check the temperature sensor and its wiring for any visible damage or loose connections.
2. Use a multimeter to test the sensor’s resistance. At room temperature, it should measure about 1000-1100 ohms.
3. Inspect the wiring between the sensor and control board for any signs of damage or loose connections.
4. If the sensor and wiring check out okay, the issue may be with the control board.
5. If steps 1-3 don’t resolve the issue, replace the temperature sensor.
6. If replacing the sensor doesn’t fix the problem, you may need to replace the control board.

F3E2: Temperature sensor circuit problem

• Meaning: The oven is unable to read the temperature correctly.
• Common causes:
  • Open or shorted temperature sensor
  • Damaged wiring between sensor and control board
• How to fix:

1. Inspect the temperature sensor and its wiring for visible damage.
2. Test the sensor’s resistance (should be about 1000-1100 ohms at room temperature).
3. Check continuity of the wiring between the sensor and control board.
4. If steps 1-3 don’t resolve the issue, replace the temperature sensor.

F5: Electronic control board issue

• Meaning: The F5 error code indicates an issue with the electronic control board or hardware problem.
• Common causes:
  • Faulty electronic range control (ERC) board
  • Hardware malfunction
  • Watchdog circuit disagreement
• How to fix:
  • Power cycle the oven:

1. Unplug the oven or turn off power at the circuit breaker for at least 1 minute.
   • Restore power and see if the error clears.
2. Inspect the control board:
   • Look for any visible signs of damage, burnt components, or loose connections on the control board.
3. Check wiring:
   • Ensure all wiring connections to the control board are secure and undamaged.
4. Replace the control board:
   • If the error persists after power cycling and inspection, the electronic range control board likely needs to be replaced.
5. Seek professional help:
   • Given that this error involves the main control board, it’s often best to have a qualified Maytag appliance technician diagnose and repair the issue if you’re not comfortable working with electronic components.

The F5 error is considered a serious issue as it affects the core functionality of the oven. It’s important to address it promptly to restore proper operation of your Maytag oven.

F5E1: Door lock motor malfunction

• Meaning: There’s a problem with the oven’s main control board or door locking mechanism.

Common causes:

• Faulty door lock motor
• Control board hardware failure
• Wiring issues

How to fix:

1. Perform a hard reset by unplugging the oven for 5 minutes.
2. Check the door lock mechanism for any obstructions or visible damage.
3. Inspect wiring to the door lock motor and control board.
4. If the error persists, professional diagnosis may be needed to determine if the control board or door lock assembly requires replacement.

F7 Error Code: Function key shorted or stuck

Meaning: One of the buttons on the control panel is continuously activated or malfunctioning.

Common causes:

• Physical damage to the touchpad
• Debris under the control panel
• Faulty membrane switch

How to fix:

1. Carefully clean the control panel with a slightly damp cloth.
2. Gently press each button to see if any feel stuck or unresponsive.
3. If cleaning doesn’t help, the touchpad may need replacement.

F9 Error Codes

F9: Door latch problem

F9E0: Door lock mechanism failure

Meaning: The oven is having trouble with the door locking or unlocking mechanism.

Common causes:

• Obstruction in the door latch
• Faulty door lock motor
• Damaged wiring to the lock mechanism

How to fix:

1. Inspect the door latch area for any visible obstructions or damage.
2. Manually move the latch to check for smooth operation.
3. Check wiring connections to the door lock motor.
4. If steps 1-3 don’t resolve the issue, the door lock assembly may need replacement.

Other Common Error Codes

F6E1: Communication error

Meaning: There’s a communication problem between oven components.

How to fix:

1. Perform a hard reset by unplugging the oven for 5 minutes.
2. Check all wiring harnesses for secure connections.
3. If the error persists, professional diagnosis may be needed.

5A6/SAB: Sabbath mode activated

Meaning: The oven is in Sabbath mode, which disables certain features.

How to fix:

1. To exit Sabbath mode, press and hold the Clock pad for 5 seconds.

600D: Control board communication error

Meaning: There’s an internal communication issue within the control board.

How to fix:

1. Perform a hard reset by unplugging the oven for 5 minutes.
2. If the error persists, the control board likely needs replacement by a professional.

Maytag Double Oven and Wall Oven Specific Codes

Maytag double ovens and wall ovens have specific error codes that help diagnose various issues. Here are some of the common error codes and their meanings:

Error Code	Meaning	Resolution
F1-1	Upper runaway cook temperature	Check and replace the upper oven temperature sensor if necessary.
F1-2	Lower runaway cook temperature	Check and replace the lower oven temperature sensor if necessary.
F1-3	Upper runaway clean temperature	Inspect the upper oven temperature sensor and wiring.
F1-4	Lower runaway clean temperature	Inspect the lower oven temperature sensor and wiring.
F1-5	Keypad cancel upper	Check the upper oven keypad for damage and secure connections.
F1-6	Keypad cancel lower	Check the lower oven keypad for damage and secure connections.
F1-7	Keypad disconnected	Ensure the keypad is properly connected to the ERC.
F1-8	Keypad shorted	Inspect the keypad for moisture or damage and replace if needed.
F1-A	Upper latch switch issue	Inspect and replace the upper latch switch if faulty.
F1-B	Lower latch switch issue	Inspect and replace the lower latch switch if faulty.
F1-C	Upper door switch issue	Check the upper door switch for obstructions or damage.
F1-D	Lower door switch issue	Check the lower door switch for obstructions or damage.
F9-1	Latch lock upper	Ensure the upper door latch is unobstructed and operating smoothly.
F9-2	Latch unlock upper	Ensure the upper door latch is unobstructed and operating smoothly.
F9-3	Latch lock both upper	Check both upper latches for obstructions or damage.
F9-4	Latch lock lower	Ensure the lower door latch is unobstructed and operating smoothly.
F9-5	Latch unlock lower	Ensure the lower door latch is unobstructed and operating smoothly.
F9-6	Latch lock both lower	Check both lower latches for obstructions or damage.

Maytag Double Oven Error Codes

F1 Series Errors

• F1-1: Upper runaway cook temperature. Indicates the upper oven’s temperature is exceeding the set limit.
• F1-2: Lower runaway cook temperature. Indicates the lower oven’s temperature is exceeding the set limit.
• F1-3: Upper runaway clean temperature. Indicates excessive temperature during the cleaning cycle in the upper oven.
• F1-4: Lower runaway clean temperature. Indicates excessive temperature during the cleaning cycle in the lower oven.

Resolution: Check the temperature sensor for both upper and lower ovens and replace if necessary. Ensure there are no obstructions or wiring issues.

F1 Series Keypad and Control Errors

• F1-5: Keypad cancel upper. Indicates an issue with the upper oven keypad.
• F1-6: Keypad cancel lower. Indicates an issue with the lower oven keypad.
• F1-7: Keypad disconnected. Indicates a disconnection between the keypad and the electronic range control (ERC).
• F1-8: Keypad shorted. Indicates a short circuit in the keypad.

Resolution: Check the keypad for damage, ensure all connections are secure, and replace the keypad if necessary. Inspect for moisture in the clock assembly[1][3][4].

Latch and Door Switch Errors

• F1-A: Upper latch switch issue.
• F1-B: Lower latch switch issue.
• F1-C: Upper door switch issue.
• F1-D: Lower door switch issue.

Resolution: Inspect the door latch and switch assemblies for obstructions or damage. Replace any faulty components[1][3][4].

F9 Series Errors

• F9-1: Latch lock upper.
• F9-2: Latch unlock upper.
• F9-3: Latch lock both upper.
• F9-4: Latch lock lower.
• F9-5: Latch unlock lower.
• F9-6: Latch lock both lower.

Resolution: Check for obstructions in the door lock mechanism. Ensure the latch is operating smoothly and replace any faulty parts.

Maytag Wall Oven Specific Codes

These codes often overlap with those for double ovens, as they share similar components and issues. The primary difference is in the configuration and specific model nuances. The same troubleshooting steps apply to wall ovens as they do for double ovens.

If these solutions don’t resolve the issues, it’s recommended to contact a qualified Maytag appliance repair technician for further diagnosis and repair.

Maytag Gas Oven Error Codes

Maytag gas ovens, like many appliances, come with a range of error codes to help diagnose issues. Here are some common error codes you might encounter:

Error Code	Meaning	Solution
F0	Function key stuck	Press the appropriate key to release it. If the issue persists, consider replacing the keyboard.
F1	Malfunctioning electronic control board	Disconnect the appliance from the power source for 10 minutes. If the error persists, seek professional assistance.
F2	High temperature error	Inspect the temperature sensor and relay unit for damage or malfunction. Replace if necessary.
F3	Shorted or open temperature sensor	Examine the temperature sensor and its wiring connections. Replace the sensor if any issues are detected.
F5	Hardware problem or watchdog circuit malfunction	Inspect the clock unit (ERC) for hardware problems. Get it repaired by a professional if needed.
F7	Stuck key on the touchpad or shorted function key	Try pressing the button again. If it doesn’t unstuck, repair or replace the touchpad or clock assembly unit.
F9	Door latch problem	Check the door lock and latch assembly for proper operation. Ensure there are no obstructions.

1. F1 – Keypad Error: This typically indicates a problem with the oven’s touchpad or control board. Try resetting the oven by turning off the power at the circuit breaker, then turning it back on.
2. F2 – Oven Temperature Too High: This error suggests that the oven is reaching temperatures that are too high. It could be caused by a faulty temperature sensor or a problem with the oven’s control board.
3. F3 – Open or Shorted Oven Temperature Sensor: This code means there’s a problem with the temperature sensor, which could be due to a wiring issue or a defective sensor.
4. F4 – Oven Temperature Sensor Out of Range: This indicates that the temperature sensor is giving readings that are outside the normal range. This could be a wiring issue or a faulty sensor.
5. F5 – Oven Door Latch Error: The oven door latch might be malfunctioning or not engaging properly. Check if the door latch is stuck or obstructed.
6. F7 – Touchpad or Control Board Error: Similar to F1, this code points to a problem with the touchpad or the control board. A reset might help, but if the problem persists, the control board or touchpad may need to be replaced.
7. F9 – Door Lock Error: This indicates an issue with the door lock mechanism, which may prevent the oven from operating properly.
8. F10 – Temperature Sensor Error: This is another code related to temperature sensor issues, indicating that the sensor might be malfunctioning.

If you encounter one of these error codes, try the basic troubleshooting steps first, such as resetting the oven or checking for loose or damaged wires. If the problem persists, it may be necessary to consult the oven’s manual or contact a professional technician for repair.

Troubleshooting Non-Error Code Issues

When troubleshooting non-error code issues with a Maytag oven, such as the oven not heating up, not turning on, or not heating properly, several common causes and solutions can be considered. Here’s a detailed guide based on the provided search results:

Here’s a table summarizing the troubleshooting steps for non-error code issues with a Maytag oven:

Issue	Common Causes
Oven Not Heating Up	– Faulty igniter
	– Broken bake element
	– Malfunctioning thermostat
	– Control board issues
Oven Won’t Turn On	– Defective electronic control board
	– Blown fuse or tripped circuit breaker
	– Power supply issues
Oven Won’t Heat Properly	– Misaligned or damaged temperature sensor
	– Bad relay or heating element

Oven Not Heating Up

Common Causes:

• Faulty Igniter: The igniter may be cracked or malfunctioning, preventing the oven from heating. It might not produce a spark or may emit a clicking sound without lighting the gas.
• Broken Bake Element: A damaged bake element can prevent the oven from reaching the desired temperature. Look for visible damage such as cracks or burn marks.
• Malfunctioning Thermostat: The thermostat controls the oven’s temperature. If it’s broken, the oven may not heat properly.
• Control Board Issues: A defective control board can disrupt the oven’s ability to heat by failing to regulate temperature settings.

Solutions:

1. Inspect the Igniter: Check for visible damage and test its continuity with a multimeter. Replace if necessary.
2. Check the Bake Element: Look for signs of damage and test for continuity. Replace if the element is faulty.
3. Test the Thermostat: Use an oven thermometer to compare the set temperature with the actual temperature. Replace the thermostat if it’s malfunctioning.
4. Examine the Control Board: Inspect for signs of damage or burnt components. Consider replacing the board if it’s faulty.

Oven Won’t Turn On

Common Causes:

• Defective Electronic Control Board: This can lead to a lack of power or failure to turn on.
• Blown Fuse or Tripped Circuit Breaker: A blown fuse or tripped breaker can cut power to the oven.
• Power Supply Issues: A dead power supply board will prevent the oven from powering up.

Solutions:

1. Reset the Circuit Breaker: Check your home’s electrical panel and reset any tripped breakers.
2. Inspect the Power Supply: Ensure the oven is properly plugged in and the outlet is functioning.
3. Check the Control Board: Look for visible damage and test its functionality. Replace if necessary.

Oven Won’t Heat Up Properly

Common Causes:

• Misaligned or Damaged Temperature Sensor: This can lead to incorrect temperature readings and uneven heating.
• Bad Relay or Heating Element: A faulty relay or heating element can prevent the oven from heating evenly.

Solutions:

1. Test the Temperature Sensor: Remove and test the sensor with a multimeter. Replace if it doesn’t give the correct reading.
2. Inspect the Heating Element: Look for visible damage and test for continuity. Replace if necessary.
3. Check the Relay: Use a multimeter to test the relay’s continuity. Replace if it’s faulty.

If these troubleshooting steps do not resolve the issue, it is recommended to contact a professional technician for further diagnosis and repair. This ensures safety and proper handling of complex components.

How to Reset Your Maytag Oven

Resetting your Maytag oven can resolve minor glitches and restore normal functionality. Here’s a step-by-step guide on how to reset your oven, along with advice on when to attempt a reset versus when to call a professional:

Step-by-Step Guide to Resetting Your Maytag Oven

1. Turn Off the Oven:

• Press the “Cancel” or “Off” button on the control panel to stop any active functions.

1. Unplug the Oven:

• Disconnect the oven from the power source by unplugging it from the wall outlet. If the plug is not accessible, turn off the power at the circuit breaker.

1. Wait for a Few Minutes:

• Leave the oven unplugged for at least 5 minutes. This allows the control board to reset.

1. Plug the Oven Back In:

• Reconnect the oven to the power source by plugging it back in or turning the circuit breaker back on.

1. Check the Display:

• Turn the oven back on and check the display for any error codes or messages. If the display is clear, the reset was successful.

1. Test the Oven:

• Run a simple cooking function to ensure the oven is operating correctly.

When to Reset vs. When to Call a Professional

When to Reset:

• Minor Glitches: If the oven is displaying an error code that doesn’t indicate a severe malfunction, such as a temporary power outage or a simple control panel error.
• Unresponsive Controls: When the control panel is unresponsive or behaving erratically, a reset can often resolve the issue.
• Before Calling for Help: It’s a good first step to try resetting before seeking professional assistance, as it can save time and potentially resolve the problem.

When to Call a Professional:

• Persistent Error Codes: If error codes reappear after a reset, indicating a deeper issue with components like the control board or temperature sensor.
• Physical Damage: Visible damage to components, such as a cracked igniter or broken bake element, requires professional repair.
• Safety Concerns: If there are any signs of electrical issues, such as sparking or burning smells, it’s crucial to contact a technician immediately.
• Complex Repairs: For issues involving the electronic control board, wiring, or other internal components, professional diagnosis and repair are recommended.

Resetting your Maytag oven is a simple process that can resolve many minor issues. However, if problems persist after a reset, it’s important to consult with a qualified appliance repair technician to ensure safe and effective repairs.

Preventive Maintenance Tips

To ensure your Maytag oven remains in optimal condition and to avoid common error codes, regular preventive maintenance is crucial. Here’s a comprehensive guide on preventive maintenance tips, when to call a professional, and how to find a qualified Maytag technician.

How to Avoid Common Error Codes

• Regular Cleaning: Clean your oven regularly to remove spills and residue that can interfere with heating elements and sensors.
• Inspect Door Seals: Check and replace oven door seals if they are worn or damaged to ensure proper heat retention.
• Calibrate Temperature: Periodically check and calibrate the oven temperature to maintain accurate cooking settings.
• Avoid Abrasive Cleaners: Use non-abrasive cleaners to prevent damage to the oven’s interior.
• Ensure Proper Airflow: Keep the oven vent clear of obstructions for efficient operation.
• Use Appropriate Cookware: Avoid placing foil directly on the oven bottom, as it can restrict airflow and affect performance.

Regular Maintenance Practices

• Inspect Heating Elements: Regularly check heating elements for signs of wear or damage and replace them if necessary.
• Lubricate Moving Parts: Lubricate chains, belts, and bearings to reduce friction and wear.
• Test Ventilation System: Ensure the ventilation system is functioning properly to maintain airflow.
• Monitor Performance: Keep track of the oven’s performance and address any irregularities promptly.

When to Call a Professional

Signs that Indicate Professional Repair is Needed

• Uneven Cooking: Consistently uneven cooking results may indicate a malfunctioning heating element or fan.
• Unusual Noises: Banging, whirring, or ticking noises suggest loose or broken parts.
• Faulty Temperature Regulation: Difficulty in reaching or maintaining set temperatures may require thermostat or sensor repairs.
• Persistent Burning Smell: This could signal electrical issues or overheating components, requiring immediate attention.
• Oven Won’t Turn On: Issues with power supply, control board, or ignition in gas ovens necessitate professional servicing.

How to Find a Qualified Maytag Technician

• Authorized Service Providers: Contact Maytag’s certified repair services, such as The Appliance Pros+, for both in and out-of-warranty repairs.
• Local Repair Services: Use reputable services like Sears Home Services, which offers certified technicians and a satisfaction guarantee.
• Online Scheduling: Book a repair appointment online through Maytag’s official website or trusted service providers for convenience and reliability.

By following these preventive maintenance tips and knowing when to seek professional help, you can extend the life of your Maytag oven and maintain its efficiency. Regular maintenance not only prevents common error codes but also ensures safe and reliable operation.

Related Questions and Terms